Fujitsu 1FINITY L100 User Manual page 178

Initial System Turn Up
Configure IP Connection to DCN
Virtuora NC
Virtuora User
NETCONF/
Interface
YANG
DCN
WebGUI
CLI
Remote Users
Figure 93
Initial Configuration of NEs
Subsequent provisioning can be conceptualized by performing the following steps:
1. Configure the NEM interface at each NE.
Note: NEM interfaces are needed to provide an IP address to share with unnumbered IP interfaces that
are yet to be created.
Virtuora NC
Virtuora User
Interface
DCN
WebGUI
CLI
Remote Users
Figure 94
Configuring NEM Interface
2. Create an unnumbered IP interface to each OSC link and configure each of them to share the NE NEM IP
address.
·
Release 19.1.1 Issue 1.1, May 2021
LAN
Router
(OSPF)
Switch LAN cable
NETCONF/
YANG
LAN
Router
(OSPF)
Switch LAN cable
OSC
OSC
LCN1
Routing
Instance
(OSPF)
ROADM / ILA
Site B
OSC
OSC
LCN1
Routing
Instance
(OSPF)
NEM
IP Address
ROADM / ILA
Site B
ROADM / ILA
Site C
NEM
IP Address
ROADM / ILA
Site C
Fujitsu and Fujitsu Customer Use Only
178