Fujitsu 1FINITY L100 User Manual page 128

128
Equipment Installation
Install 23-Inch, 4-Post Rack Rail Kit
Figure 55
Attaching Rear Flange 23-Inch, 4-Post Rack Bracket
Step 6
Verify front and rear flanges on each bracket are installed in the correct rack position.
Step 7
Verify the installed brackets on the 23-inch, 4-post rack are spaced 440 mm apart and that brackets are level, as
shown in the following figure.
Note: Confirm the bracket spacing is correct at the front and rear of the rack. Use the bolts on the flanges to
adjust the spacing and tilt of the brackets.
Inner Width: 440 mm
Front View
Figure 56
Bracket Spacing 23-Inch, 4-Post Rack
Step 8
Tighten all bolts completely on each bracket.
· Fujitsu and Fujitsu Customer Use Only
Release 19.1.1 Issue 1.1, May 2021