Fujitsu 1FINITY L100 User Manual page 440

440
Equipment Removal
Remove Blade from Rack
Remove the blade by performing the following substeps:
a) Find the locking tabs on each side of the blade.
b) With the blade at the locked position, place one hand on each side of the blade.
c) Press both locking tabs UP and slowly pull the blade to release. Continue pulling blade until fully removed
from the rack.
Unlock
Figure 179
Unlocking Blade from Rack
· Fujitsu and Fujitsu Customer Use Only
Release 19.1.1 Issue 1.1, May 2021