Fujitsu 1FINITY L100 User Manual page 384

System Maintenance
Equipment Replacement
PIU Slots
Closed
Figure 134
Unlatching Fiber Restraint Gate
Step 30
After opening the fiber restraint gates, secure the blade to the rack using the set screws on the left- and right-
hand sides of the blade.
Note: The set screws for securing the blade are accessible after opening the fiber restraint gates on the left-
and right-hand sides of the blade.
Step 31
Replace the fiber-optic and RJ-45 cables that are previously removed.
Step 32
Verify that power is turned off at the source and install the power cables.
Step 33
Is the blade being installed a Main blade?
If YES:
Continue with next step.
If NO:
Proceed to Step 39.
·
Release 19.1.1 Issue 1.1, May 2021
Fiber Restraint
Gate
Set Screw
Open
384
Fujitsu and Fujitsu Customer Use Only