Initial System Turn Up
Configure IP Connection to DCN
Step 3
Check the candidate configuration, if desired.
Command:
% show routing routing-instance
Step 4
Save the changes.
Command:
% commit
Step 5
Exit configuration mode.
Command:
% exit
Continue with the next task.
Connect LCN1 to DCN
Step 6
Connect the LCN1 port to the DCN.
Identify IP Address Assigned to LCN1 by DHCP
Step 7
Change to operational mode.
Command:
% exit
Step 8
Show IP address state on LCN1.
Command:
> show interfaces-state interface ip-1/0/0/LCN1 ipv4 address
Output Example:
IP
ORIGIN
---------------------------------
192.168.229.235
dhcp
✓
This task is complete.
·
Release 19.1.1
Issue 1.1, May 2021
PREFIX
LENGTH
24
175
Fujitsu and Fujitsu Customer Use Only