Provision L110 Tributary Blade Och Interfaces - Fujitsu 1FINITY L100 User Manual

ROADM Turn-Up and Operations
Adding L110 Blade to ROADM
Step 27
In the /equipment:eqpt/shelf(n)/slot(x)/subslot(0)/port("Cz") tab, select up from the admin-status dropdown
list.
Step 28
Select Client from the pluggableInterfaceType dropdown list.
Step 29
Press Commit to commit the changes.
Step 30
Close the /equipment:eqpt/shelf(n)/slot(x)/subslot(0)/port("Cz") tab.
Step 31
Repeat Step 24 through Step 30
Step 32
If a second slot is provisioned, repeat
second slot.
Step 33
Close the following tabs:
■ /equipment:eqpt/shelf, /equipment:eqpt/shelf(n)
■ /equipment:eqpt/shelf(n)/slot("x")
■ /equipment:eqpt/shelf(n)/slot("x")/subslot("0")
Continue with the next task.
7.12.2

Provision L110 Tributary Blade OCH Interfaces

Step 1
Provision an OCH interface on a PIL1-3PS2 PIU.
Command:
% set interfaces interface och-3/1/0/C1 type opticalChannel enabled och
Step 2
Repeat Step 1 for each OCH interface (1...16) to be provisioned.
✓
This task is complete.
·
Release 19.1.1 Issue 1.1, May 2021
for each client port to be provisioned.
Step 10 through Step 31 to provision the edge and client ports for the
274
Fujitsu and Fujitsu Customer Use Only