Additional Interfaces; Safety Notes; Serial Interface; Installing The Serial Interface - Fujitsu PRIMERGY RX2540 M7 Upgrade And Maintenance Manual

16

Additional interfaces

16.1

Safety notes

CAUTION
▶
For more information, see
16.2

Serial interface

16.2.1

Installing the serial interface

Upgrade and Repair Unit
(URU)
Tools: – Phillips PH2 / (+) No. 2 screw driver (for cover 2)
– Flat screw driver
– Hexagon screw driver 5 mm
Preliminary steps
▶ If applicable,
"Removing the front cover with lock" on page
▶
"Shutting down the server" on page
▶
"Disconnecting the power cord" on page
▶
"Getting access to the component" on page
▶ Remove the riser module 1, see
▶ If applicable, remove the slot bracket from PCIe slot 5,
brackets" on page
RX2540 M7
"Important information" on page
50.
"Removing a riser module" on page
252.
Upgrade and Maintenance Manual
Hardware: 5 minutes
50.
55.
see"Removing slot
33.
49.
72.
479