▶
"Removing the air duct" on page
▶
"Removing the fan cage" on page
▶
"Removing the crossbar" on page
Removing the defective TPM
▶ Remove the TPM, see
▶ Leave the TPM spacer on the system board when removing the defective
TPM.
Installing the new TPM
The TPM spacer is already present on the system board.
▶ Install the TPM, see
Concluding steps
▶
"Installing the crossbar" on page
▶
"Installing the fan cage" on page
▶
"Installing the air duct" on page
▶ Install all riser modules, see
▶
"Reassembling" on page
▶ If applicable, install the OCP module, see
page
262.
▶ Install all PSUs, see
▶
"Connecting the power cord" on page
▶
"Switching on the server" on page
▶ Verify whether the iRMC recognizes the installed TPM.
▶ If applicable,
"Installing the front cover with lock" on page
▶
"Resuming BitLocker functionality" on page
RX2540 M7
80.
76.
83.
"Removing the TPM" on page
"Installing the TPM" on page
84.
77.
79.
"Installing a riser module" on page
59.
"Installing a hot-plug PSU" on page
71.
Upgrade and Maintenance Manual
System board and components
497.
493.
"Installing an OCP module" on
65.
107.
74.
126.
71.
503