Fujitsu PRIMERGY RX2540 M7 Upgrade And Maintenance Manual page 232

Hard disk drive (HDD) / solid state disk (SSD)
Figure 119: Connecting the cables to the rear HDD backplane (example with slimline cable)
▶ Connect the following cables to the rear HDD backplane:
1 SAS/SATA cable depending on configuration
2 Power cable to HDD backplane and connector "PWR7" on system
board
3 OOB cable to HDD backplane and connector "SMB3" on system
board
For the cable plan, see chapter
Installing additional HDD/SSD/PCIe SSD modules
▶ Insert additional HDD/SSD modules, see
modules" on page 177
SSD modules" on page
232
"Appendix B" on page
or PCIe SSD modules, see
185.
Upgrade and Maintenance Manual
559.
"Installing 2.5-inch HDD/SSD
"Installing 2.5-inch PCIe
RX2540 M7