Replacing Memory Modules - Fujitsu PRIMERGY RX2540 M7 Upgrade And Maintenance Manual

Removing a memory module
Figure 207: Removing memory modules
▶ Eject the desired memory module by pressing out the securing clips at each
end of the memory slot (1).
▶ Remove the ejected memory module (2).
▶ If applicable, install a dummy module, see
module" on page
Concluding steps
▶
"Installing the air duct" on page
▶
"Reassembling" on page
▶
"Connecting the power cord" on page
▶
"Switching on the server" on page
▶ If applicable,
"Installing the front cover with lock" on page
▶
"Resuming BitLocker functionality" on page
10.5

Replacing memory modules

Upgrade and Repair Unit
(URU)
Tools: Phillips PH2 / (+) No. 2 screw driver (for cover 2)
RX2540 M7
347.
79.
59.
71.
Upgrade and Maintenance Manual
"Installing a memory dummy
65.
107.
Hardware: 5 minutes
Main memory
71.
345