Replacing An M.2 Ssd - Fujitsu PRIMERGY RX2540 M7 Upgrade And Maintenance Manual

Hard disk drive (HDD) / solid state disk (SSD)
Concluding steps
▶
"Reassembling" on page
▶
"Connecting the power cord" on page
▶
"Switching on the server" on page
▶ If applicable,
"Installing the front cover with lock" on page
7.8.4

Replacing an M.2 SSD

Upgrade and Repair Unit
(URU)
Tools: Phillips PH2 / (+) No. 2 screw driver (for cover 2)
Some M.2 SSDs have a write life (limited life component). Ask the
customer to check the write status before replacing the spare part. If the
product has reached the end of its life, ask the customer to purchase it
again.
For Japan, refer to the following:
https://jp.fujitsu.com/platform/server/primergy/support/parts/#parts2
Preliminary steps
▶
"Locating the defective server" on page
▶ If applicable,
"Removing the front cover with lock" on page
▶
"Checking boot priority" on page
▶
"Shutting down the server" on page
▶
"Disconnecting the power cord" on page
▶
"Getting access to the component" on page
218
59.
65.
71.
93.
50.
Upgrade and Maintenance Manual
Hardware: 5 minutes
Software: 15 minutes
47.
50.
55.
71.
49.
RX2540 M7