Installing 2.5-Inch Pcie Ssd Modules - Fujitsu PRIMERGY RX2540 M7 Upgrade And Maintenance Manual

7.6.5

Installing 2.5-inch PCIe SSD modules

Customer Replaceable
Unit (CRU)
Tools: tool-less
If the PCIe SSD module is controlled by a RAID controller of the PRAID
EP5x0i family, the PCIe SSD module can be installed during operation
(hot-plug), see
Preliminary steps
▶ If applicable,
"Removing the front cover with lock" on page
▶ Locate the correct drive bay, see
▶ Depending on your operating system:
page 50.
Removing a 2.5-inch HDD/SSD dummy lock
In configuration with only one 8x 2.5-inch HDD backplane dummy locks
are installed to make it impossible to equip the bays with no HDD
backplane behind.
RX2540 M7
Hard disk drive (HDD) / solid state disk (SSD)
"Installing a 2.5-inch HDD/SSD module" on page
"Overview of configurations" on page
Upgrade and Maintenance Manual
Hardware: 5 minutes
"Shutting down the server" on
179.
49.
165.
185