Fujitsu PRIMERGY RX2540 M7 Upgrade And Maintenance Manual page 316

Expansion cards and backup units
▶ If applicable,
"Configuring LAN teaming" on page
▶
"Suspending BitLocker functionality" on page
▶
"Checking boot priority" on page
▶
"Shutting down the server" on page
▶
"Disconnecting the power cord" on page
▶
"Getting access to the component" on page
▶
"Locating the defective component" on page
▶ Remove the corresponding riser module, see
page 72.
Removing the defective expansion card
▶ Remove the expansion card, see
page 278.
▶ If the slot bracket on the defective expansion card is to be reused, remove it
from the expansion card, see
Installing the new expansion card
▶ If applicable, install the slot bracket, see
page 249.
▶ Install the expansion card, see
Concluding steps
▶ Install the corresponding riser module, see
page 74.
▶
"Reassembling" on page
▶ If applicable, connect external cables to the expansion card.
▶
"Connecting the power cord" on page
▶
"Switching on the server" on page
▶ If applicable,
"Installing the front cover with lock" on page
▶
"Enabling replaced components in the BIOS" on page
316
93.
50.
"Removing an expansion card" on
"Removing slot brackets" on page
"Installing an expansion card" on page
59.
65.
71.
Upgrade and Maintenance Manual
115.
89.
50.
55.
48.
"Removing a riser module" on
"Installing slot brackets" on
"Installing a riser module" on
71.
102.
252.
269.
RX2540 M7