Fujitsu PRIMERGY RX2540 M7 Upgrade And Maintenance Manual page 496

System board and components
Concluding steps
▶ If applicable,
"Installing an expansion card" on page
▶ If applicable,
"Installing the riser module 2" on page
▶
"Reassembling" on page
▶
"Connecting the power cord" on page
▶ In case of VMware (vSphere 7.0 U3 or later) environment, see
the ESXi configuration information encryption functionality" on page
▶
"Switching on the server" on page
▶ If applicable,
"Installing the front cover with lock" on page
▶ In case of Windows as operating system,
functionality" on page
▶ Enable the TPM in the system board BIOS, see
system board BIOS" on page
Enabling the TPM in the system board BIOS
▶ Switch on or restart your server.
▶ As soon as the startup screen appears, press the [F2] function key to enter
the BIOS setup menu.
▶ Select the Configuration menu.
▶ Select the Security Configuration submenu.
▶ Set the TPM Support setting to Enabled.
▶ Under Pending TPM operation, select the desired TPM operation mode.
▶ Save your changes and exit the BIOS.
For more information on how to access the BIOS and modify settings,
see the corresponding BIOS Setup Utility reference manual.
496
59.
65.
71.
107.
496.
Upgrade and Maintenance Manual
269.
75.
71.
"Resuming BitLocker
"Enabling the TPM in the
"Recovering
121.
RX2540 M7