Replacing A Cpu Or Heat Sink - Fujitsu PRIMERGY RX2540 M7 Upgrade And Maintenance Manual

Removing the CPU dummy cover
Figure 223: Removing the CPU dummy cover from the socket
▶ Eject the CPU dummy cover from the memory slot by pressing out the
securing clips at each end of the memory slot on both sides of the CPU
socket (1).
▶ Remove the CPU dummy cover (2) and put it aside for future use.
▶ If applicable, install a memory dummy module, see
dummy cover" on page
11.5

Replacing a CPU or heat sink

Field Replaceable Unit
(FRU)
RX2540 M7
364.
Upgrade and Maintenance Manual
Processor (CPU)
"Installing the CPU
Hardware: 15 minutes
Software: 5 minutes
365