Fujitsu PRIMERGY RX2540 M7 Upgrade And Maintenance Manual page 540

Appendix A
Status
flashing orange
HDD/SSD activity indicator (5)
Status
flashing green
iRMC-related status signals
ID indicator
flashing blue
flashing blue
540
Description
Non-CSS component failure detected.
Possible causes:
– System is out of the specified temperature range
– Defective sensor
– CPU error
– Error detected by server management software
Description
Data access in progress.
There are cases in which the HDD/SSD
activity indicator does not flash green during
data access depending on disk connection
configuration. For example, if a PCIe SSD is
not connected to a RAID controller, the
HDD/SSD activity indicator does not flash
green. Data access can be recognized at
"Access indicator (1)" on page
Global error
indicator
off
flashing orange An emergency flash of the iRMC firmware
Upgrade and Maintenance Manual
Description
A remote connection has been
established. Local VGA output has been
disabled during the remote session.
is in progress.
546.
RX2540 M7