Fujitsu PRIMERGY RX2540 M7 Upgrade And Maintenance Manual page 282

Expansion cards and backup units
Note on expansion card replacement
Some FC/CNA/LAN/IB cards support adjusting the firmware version
after maintenance and replacement to the specified version. There are
cards that support matching the number of editions specified by the
customer to manage the card.
Also, check the settings before replacing some cards and reconfigure
after replacing some cards.
Follow the procedure specified separately.
For Japan:
Follow the instructions provided separately.
Preliminary steps
▶
"Locating the defective server" on page
▶ If applicable,
"Configuring LAN teaming" on page
▶
"Suspending BitLocker functionality" on page
▶
"Checking boot priority" on page
▶ If applicable,
"Removing the front cover with lock" on page
▶
"Shutting down the server" on page
▶
"Disconnecting the power cord" on page
▶
"Getting access to the component" on page
▶
"Locating the defective component" on page
Removing the defective expansion card
▶ Remove the expansion card, see
page 278.
▶ If the slot bracket on the defective expansion card is to be reused, remove it
from the expansion card, see
282
93.
50.
"Removing an expansion card" on
"Removing slot brackets" on page
Upgrade and Maintenance Manual
47.
115.
89.
50.
55.
48.
49.
252.
RX2540 M7