Fujitsu PRIMERGY RX2540 M7 Upgrade And Maintenance Manual page 522

System board and components
Messages of firmware restore in SEL log files
If the firmware restore is successfully completed, the following messages will
be recorded.
– When firmware version in iRMC microSD card and firmware version of
replaced system board is different:
...
<iRMC>: Firmware 1 has been successfully restored from SD
card.
<iRMC>: Firmware 2 has been successfully restored from SD
card.
...
The Golden Image has been successfully restored from SD
card.
...
Chassis IDPROM: BIOS restore successful
...
BIOS TFTP or HTTP/HTTPS flash OK.
...
BIOS TFTP or HTTP/HTTPS flash OK (Recovery area)
If firmware restore fails after system board replacement, the SEL described
above is not recorded.
– When firmware version in iRMC microSD card and firmware version of
replaced system board is same:
...
Restore of iRMC firmware 1 omitted because the already
flashed firmware has the same version
Restore of iRMC firmware 2 omitted because the already
flashed firmware has the same version
...
Restore of the Golden Image omitted because the already
flashed Golden Image has the same version
...
Chassis IDPROM: BIOS restore successful
...
BIOS TFTP or HTTP/HTTPS flash OK....
BIOS TFTP or HTTP/HTTPS flash OK (Recovery area)
522 Upgrade and Maintenance Manual RX2540 M7