Sliding The Server Into The Rack - Fujitsu PRIMERGY RX2540 M7 Upgrade And Maintenance Manual

Basic hardware procedures
4.6.4

Sliding the server into the rack

Figure 15: Sliding the server into the rack
▶ Release the locking mechanism of both rails (1).
▶ Push the server as far as it will go into the rack (2) until the two quick
release levers engage (3).
CAUTION
▶
Be careful with your fingers. You can pinch them when the quick
release levers change to the release position.
▶ Connect all cables except the power cord to the server rear.
64 Upgrade and Maintenance Manual RX2540 M7