Fujitsu PRIMERGY RX2540 M7 Upgrade And Maintenance Manual page 234

Hard disk drive (HDD) / solid state disk (SSD)
▶
"Removing the rear air grid 2" on page
Installing the rear HDD cage 3
Figure 120: Installing the rear HDD cage 3
▶ Position the rear HDD cage 3 into the chassis (1).
▶ Push the rear HDD cage 3 in the direction of the arrow (2).
▶ Fasten the knurled screw (3).
▶ If applicable, install a RAID controller or a retimer card, see
expansion card" on page
234
86.
269.
Upgrade and Maintenance Manual
"Installing an
RX2540 M7