Installing A Rear Air Grid - Fujitsu PRIMERGY RX2540 M7 Upgrade And Maintenance Manual

▶ Remove the screw (see circle).
▶ Remove the rear air grid 3.
CAUTION
Keep the rear air grid for future use.
▶
Always replace rear air grids into unused installation locations to
comply with applicable EMC regulations and satisfy
coolingrequirements.
4.14.2

Installing a rear air grid

Installing the rear air grid 1
Figure 41: Installing the rear air grid 1
▶ Insert the rear air grid 1.
▶ Fasten the two screws (see circles).
RX2540 M7 Upgrade and Maintenance Manual
Basic hardware procedures
87