Fujitsu PRIMERGY RX2540 M7 Upgrade And Maintenance Manual page 444

Accessible drives
▶ Push the locking latch in the direction of the arrow to lock the front panel
module.
Figure 295: Connecting the cables to the RDX drive
▶ Connect the power cable to the RDX drive (1).
▶ Connect the end of the power cable to connector "PWR6" on the system
board.
▶ Connect the USB cable to the RDX drive (2).
▶ Connect the end of the USB cable to connector "USB 3.0" (see close-up) on
the system board.
Concluding steps
▶
"Installing the fan cage" on page
▶
"Reassembling" on page
▶
"Connecting the power cord" on page
▶
"Switching on the server" on page
▶ If applicable,
"Installing the front cover with lock" on page
444
77.
59.
65.
71.
Upgrade and Maintenance Manual
71.
RX2540 M7