Replacing A 8X 2.5-Inch Hdd Backplane - Fujitsu PRIMERGY RX2540 M7 Upgrade And Maintenance Manual

Hard disk drive (HDD) / solid state disk (SSD)
Installing the new 2.5-inch PCIe SSD module
▶ Install the PCIe SSD module, see
on page 185.
Concluding steps
▶ If applicable,
"Switching on the server" on page
▶ Verify that the operating system recognizes the newly installed drive.
▶ If applicable,
"Installing the front cover with lock" on page
7.6.8

Replacing a 8x 2.5-inch HDD backplane

Field Replaceable Unit
(FRU)
Tools: Phillips PH2 / (+) No. 2 screw driver
In configuration with 24x 2.5-inch HDD/SSD/PCIe modules the third
backplane is a combo HDD backplane that also allows to install PCIes.
The replacing procedure is the same as a HDD backplane.
There are three types of 8x 2.5-inch HDD backplane (P/N: CA05973-8303)
with or without a foam.
192
"Installing 2.5-inch PCIe SSD modules"
Upgrade and Maintenance Manual
71.
71.
Hardware: 15 minutes
RX2540 M7