Fujitsu PRIMERGY RX2540 M7 Upgrade And Maintenance Manual page 137

For information on RAID controllers controlling the HDD/SSD/PCIe SSD
modules, see
Base units
There are five base units available.
Base unit
Type 1
Type 2
Type 3
Type 4
Type 5
Type 6
Replacing failed or aged drives
The tables show the location of the HDD in the device, BIOS Setup or HII
Configuration Utility, and the description in the OS log for each AHCI/PRAID
connection. Refer to when replacing failed or aged drives.
ServerView RAID Software is not provided anymore, If you install
ServerView Agentless Service, Server View RAID Manager is running
internally. So, the source of the logs is listed as ServerView RAID.
Example for iRMC S6 web interface display
Position
[0]
[1]
[2]
[3]
RX2540 M7
Hard disk drive (HDD) / solid state disk (SSD)
"Expansion cards and backup units" on page
Description
Base unit with up to 10x 3.5-inch HDDs
Base unit with up to 12x 3.5-inch HDDs
Base unit for up to 16x 2.5-inch HDDs/SSDs
Base unit for up to 24x 2.5-inch HDDs / SSDs /
PCIe SSDs
Base unit for up to 24x 2.5-inch PCIe SSDs
Base unit for up to 16x 2.5-inch HDDs / SSDs /
PCIe SSDs
Enclosure
Upgrade and Maintenance Manual
245.
Slot
0
1
2
3
137