Fujitsu 1FINITY L100 User Manual page 129

129
Equipment Installation
Install 23-Inch, 4-Post Rack Rail Kit
Note: Each bracket is mounted to the rack using four bolts, two in the front and two in the rear.
Step 9
Tighten the flange screws on both the left and right brackets, as shown in the following figure.
Note: Do not use excessive force to tighten the nuts.
Flange Screws
Figure 57
Tightening Flange Screws 23-Inch, 4-Post Rack Bracket
The following figure shows the installed 23-inch, 4-post rack brackets.
· Fujitsu and Fujitsu Customer Use Only
Release 19.1.1 Issue 1.1, May 2021