Cli Session Administration; Enable/Disable Cli Complete-On-Space; Change Idle Timeout; Force Logoff - Fujitsu 1FINITY L100 User Manual

System Administration

CLI Session Administration

6.8

CLI Session Administration

In this section:
6.8.1

Enable/Disable CLI Complete-on-Space

6.8.2

Change Idle Timeout

6.8.3

Force Logoff

6.8.1
Enable/Disable CLI Complete-on-Space
Hint: Setting complete-on-space to true can speed up the CLI session.
Any user can enable and disable the complete-on-space setting for their current CLI session. At the start of
every CLI session, complete-on-space is set to false, which means CLI command completion is only
triggered by the <tab> key. If the user wants the <space> key to trigger CLI command completion, set
complete-on-space to true using the following CLI command.
Command:
% set complete-on-space <true|false>
6.8.2
Change Idle Timeout
Users are automatically logged off the system if the session is idle longer than idle-timeout seconds. Users can
change the value of idle-timeout for the current session using the following CLI command.
Command:
% set idle-timeout <0...8192>
6.8.3
Force Logoff
Level-4 or Level-6 privileges are required to perform this command.
The following CLI command terminates all CLI sessions for user <username>.
Command:
> request system logout user <username>
·
Release 19.1.1 Issue 1.1, May 2021
228
Fujitsu and Fujitsu Customer Use Only