Equipment Removal
Remove Blade from Housing
PIU Slots
Closed
Figure 182
Latching Fiber Restraint Gate
Step 4
At the front of the blade, use the fiber management arms to slowly pull the blade out of the Housing to the
locked position.
At the locked position, the locks on both sides of the blade stop the blade at approximately halfway out.
Attention: Do not touch the optical fibers in adjoining slots. Make sure fibers from other blades do
not obstruct the blade being removed.
·
Release 19.1.1
Issue 1.1, May 2021
Fiber Restraint
Gate
Set Screw
Open
444
Fujitsu and Fujitsu Customer Use Only