Table of Contents
Advertisement
Equipment Installation
Install Power Terminal Adapter
Warning: The attachment screws mentioned in this step must be lined up straight in the holes and should
easily turn, right up to the point of being tight. If any resistance occurs in the first turn, stop immediately, or
risk damage to the blade (broken screws and screw holes on the blade).
Figure 66
Attachment Screws
Step 6
Replace the protection cover on the power terminal adapter.
Figure 67
Attaching Protection Cover
✓
This task is complete.
Additional Instructions:
Perform the same procedure for each blade being installed.
·
Release 19.1.1
Issue 1.1, May 2021
135
Fujitsu and Fujitsu Customer Use Only
Advertisement
Table of Contents
