Fujitsu 1FINITY L100 User Manual page 117

117
Equipment Installation
Install 23-Inch, 2-Post Rack Rail Kit
Note: Each bracket is mounted to the rack using four bolts, two in the front and two in the rear.
Step 9
Tighten the flange nuts on both the left and right brackets, as shown in the following figure.
Note: Do not use excessive force to tighten the nuts.
(2) Nuts on
this Side of Rail
Nuts
Figure 43
Tightening Flange Nuts 23-Inch, 2-Post Rack Bracket
The following figure shows the installed 23-inch, 2-post rack brackets.
· Fujitsu and Fujitsu Customer Use Only
Release 19.1.1 Issue 1.1, May 2021