Table 1.111 Setting And Display Items In The [Snmp Trap] Window; Table 1.112 Buttons In The [Snmp Trap] Window - Fujitsu PRIMEQUEST 2000 Series Tool Reference

MMB Web-UI (Web User Interface) Operations
1.5 [Network Configuration] Menu

TABLE 1.111 Setting and display items in the [SNMP Trap] window

Items
Community/User
Sets the SNMP community string for SNMP v1 and v2.
Alternatively, it sets the user name for SNMP v3.
IP Address
Sets the IPv4 or IPv6 IP address of the trap destination.
SNMP Version
Sets the SNMP version. (1, 2, 3)
Auth
Sets the security level.
You can specify this only if [3] is selected in [SNMP Version].
With [1] or [2] selected for [SNMP Version], this item is grayed out and disabled. In
this case, the available security level will be only noauth.
Auth Type
Sets the hash function to encrypt passwords.


This item takes effect only if [3] is selected for [SNMP Version]. With [1] or [2]
selected for [SNMP Version], this item is grayed out and disabled.
Auth passphrase
Sets a passphrase for authentication.
This item takes effect only if [3] is selected for [SNMP Version] and [auth] or [priv] is
selected for [Auth].
Priv passphrase
Sets a passphrase for encryption.
This item takes effect only if [3] is selected for [SNMP Version] and [priv] is selected
for [Auth].

TABLE 1.112 Buttons in the [SNMP Trap] window

Buttons
Apply Sets the specified information.
Cancel Restores the original information and does not set the specified information, such as the
community or user name, and the IP address of a trap destination.
Test Trap Sends a test trap to the specified trap destination.
(1) Menu Operation
[Network Configuration] - [SNMP Configuration] - [SNMP Trap]
(2) Window Operations
Configuring SNMP trap information
-
1. Enter the community or user name, the IP address of a trap destination, the SNMP version, and
the authentication level. Then, click the [Apply] button.
This sets the entered information.
Sending a test trap
-
1. Click the [Test Trap] button.
This sends a test trap.
[Message]
The following table lists the messages displayed in this window.
Message Number
I_00013 Setting completed.
W_00595 It is IP address that duplicates with MMB IP address.
For details on the messages displayed on the window, see
(CA92344-0540).

noauth: Do not use the authentication function.

auth: Use the authentication function.

priv: Use the authentication function and "privacy" function (data encryption).
MD5
SHA
247
Description
Description
Message
PRIMEQUEST 2000 Series Message Reference
CA92344-0539-04