Table 1.27 Display And Set Items Of [Partition Event Log Filtering Condition] Window; Table 1.28 Buttons On The [Partition Event Log Filtering Condition] Window - Fujitsu PRIMEQUEST 2000 Series Tool Reference

MMB Web-UI (Web User Interface) Operations
1.2 [System] Menu for PRIMEQUEST 2400E2/2800E2/2400E/2800E

TABLE 1.27 Display and Set Items of [Partition Event Log Filtering Condition] Window

Items
Partition Selects the partition to be displayed.
Select [All] or [Specified] by using radio button.
·
·
In case of Partition Operator, [All] option is grayed out, selection is not possible. Further,
for filtering of the partition; only the partition to be managed can be selected.
Default
·
·
Number of Specifies the number of logs to be displayed.
events to display The denominator represents the total number of logged events. Maximum 1000 events
can be displayed.
The default setting is100

TABLE 1.28 Buttons on the [Partition Event Log Filtering Condition] Window

Buttons
Apply When [Apply] button is clicked, the log corresponding to the conditions specified is displayed on
the [Partition Event Log] screen.
Cancel Returns to [Partition Event Log] window when [Cancel] button is clicked.
[Message]
This section describes the messages to be displayed on this window.
Message Number
W_00413 Nothing is selected.
W_00414 Invalid Date Format.
W_00426 Invalid Values Specified.
W_00434 Invalid Time Format.
W_00441 Range over error.
I_00417 Are you sure?
I_00531 Are you sure you want to clear the Partition Event Log?
E_00100 Failed to set the Partition Event Log Clear
For details on the messages displayed on the window, see
(CA92344-0540CA92344-0540).
All: Filtering is not done for Partition
Specified: Filtering of partition unit can be set. Select the partition to be displayed.
Partition Operator privilege. : [Specified] and Partition to be managed is turned on.
Other than the above. : [All]
Message
84
Description
Description
PRIMEQUEST 2000 Series Message Reference
CA92344-0539-04