Class Of Service Options For Disa/E&M - NEC SL1100 Programming Manual

ISSUE 4.0
20-14 : Class of Service Options for DISA/E&M
Level:
IN
Description
Use Program 20-14 : Class of Service Options for DISA/E&M to enable/disable DISA and tie line
Class of Service options. You assign a DISA Class of Service to DISA users in Program 25-09. Assign
tie line Classes of Service in 34-02. Up to 15 DISA/E&M Classes of Service can be defined.
Analog trunk-to-analog trunk and ISDN trunk-to-ISDN trunk calls are supported by this program.
However, analog trunk-to-ISDN trunk and ISDN trunk-to-analog trunk calls are NOT supported by this
program.
Input Data
Class of Service Number
Item Item
No.
01 First Digit Absorption
(Delete First Digit Di-
aled)
02 Trunk Group
Routing/ARS Access
03 Trunk Group Access
04 Outgoing System
Speed Dial
05 Operator Calling
06 Internal Paging
07 External Paging
08 Direct Trunk Access
09 Forced Trunk Discon-
nect <Not for ISDN T-
point>
Programming Manual
Program 20 : System Option Setup
Input Data
0 = Off For tie lines, enable or disable the ability to
1 = On absorb (ignore) the first incoming digit.
Use this to make the tie trunk compatible
with 3- and 4-digit tie line service. This op-
tion does not apply to DISA.
0 = Off This option enables or disables a DISA or
1 = On tie trunk caller ability to dial 9 for Trunk
Group Routing or Automatic Route Selec-
tion (ARS/F-Route).
0 = Off This option enables or disables a DISA or
1 = On tie trunk caller ability to access trunk
groups for outside calls (Service Code
704).
0 = Off This option enables or disables DISA or tie
1 = On trunk caller ability to use the System
Speed Dialing.
0 = Off This option enables or disables a DISA or
1 = On tie trunk caller ability to dial 0 for the tele-
phone system operator.
0 = Off This option enables or disables a DISA or
1 = On tie trunk caller ability to use the telephone
system Internal Paging.
0 = Off This option enables or disables a DISA or
1 = On tie trunk caller ability to use the telephone
system External Paging.
0 = Off This option enables or disables a DISA or
1 = On tie trunk caller ability to use Direct Trunk
Access (Service Code #9).
0 = Off This option enables or disables a tie trunk
1 = On caller ability to use Forced Trunk Discon-
nect (Service Code 11-10-26). This option
is not available to DISA callers.
01 ~ 15
Description
COS 01 ~ 15 = 0
COS 01 ~ 15 = 1
COS 01 ~ 15 = 1
COS 01 ~ 15 = 0
COS 01 ~ 15 = 1
COS 01 ~ 15 = 1
COS 01 ~ 15 = 1
COS 01 ~ 15 = 0
COS 01 ~ 15 = 0
SL1100
Program
20
Default
2-191