NEC SL1100 Programming Manual page 563

ISSUE 4.0
Alarm Re-
Type Name
No. port
57 2 0 IP Colli-
sion error
59 2 0 Network-
ing port
limit ex-
ceeded
(V1.5
Added)
60 2 0 SIP Reg-
istration
Error No-
tification.
61 0 0 SIP ex-
tension
trouble in-
formation.
Programming Manual
Content of
Cause
Alarm
Check the IP Collision IP Ad-
Address colli- dress in the net-
sion (CPU, work.
VOIPDB, Pro-
gram 84-26-01
GW : 1 ~ 8).
Total number of • New extension
ports exceeded or trunk ports
the limit of 168 are added.
ports in the net- • A new system is
work. added in Pro-
gram 10-27-01.
• A new system is
connected to the
network.
• EXIFU is con-
nected.
1. The regis- 1. The setting of
tration of the system da-
the SIP ta is wrong.
trunk to the 2. The setting of
SIP server the router is
failed. wrong.
2. The regis- 3. It is an error to
tration of the link of
the SIP LAN.
trunk to the 4. Net side trou-
SIP server ble.
failed in the
authentica-
tion.
3. There is no
response
from the
SIP server
to the SIP
registration
request.
1. Failed reg- 1. The registered
istration of port is used by
the SIP ex- other exten-
tension ter- sion.
minal. 2. The license is
2. The SIP ex- insufficient.
tension ter- 3. DSP of
minal was VoIPDB not
not ac- acquired.
quired:
• At Regist of
the SIP exten-
sion terminal
to SL1100.
• When you
cannot ac-
quire the DSP
resource
when it sent.
Action Recovery
Check the IP Ad- Recover the
dress in the net- IP Address
work. collision.
Reduce extensions When the to-
or trunks not to ex- tal number of
ceed 168 ports in ports be-
the network. comes 168 or
less, the error
is recoverd.
1. Confirm the The error is
following sys- recovered
tem data set- when normal-
ting -- Pro- ly connecting
grams 10-12, it.
10-28, 10-29,
10-30, and
10-36.
2. Confirm the
setting of rout-
ers.
3. Confirm
whether ab-
normality oc-
curs on the net
side.
4. Confirm the
authentication
system data
setting.
5. Confirm wiring
and the sys-
tem data set-
ting. Please in-
quire on un-
certain points
of the maker.
1. Confirm wiring
and the sys-
tem data set-
ting.
2. Confirm
whether each
equipment
such as ac-
cess points
works normal-
ly.
SL1100
Alarm
Status
WAR
ERR
Program
90
ERR
REC
ERR
REC
2-543