Program 92 : Copy Program; Copy Program - NEC SL1100 Programming Manual

ISSUE 4.0
Level:
IN
Description
Note: This program is available only via telephone programming and not through PC Programming.
Use Program 92-01 : Copy Program to copy the data for one program to another multiline terminal,
port, group, or other number. Refer to the following charts to see which programs can be copied.
Input Data
Program Number
Item No. Item
Source Number
Destination Number (From)
01
Destination Number (To)
The Copy Program is applicable only for the following programs :
Trunk Port Base
Program No.
14-01 Trunk Basic Data Setup
14-02 Analog Trunk Data Setup
14-04 Behind PBX Setup
14-08 Music on Hold Source for Trunks
14-09 Conversation Recording Destination for Trunk
20-30 Timer Class for Trunk
21-03 Trunk Group Routing for Trunks
21-12 ISDN Calling Party Number Setup for Trunk
21-21 Toll Restriction for Trunks
21-22 CO Message Waiting Indication
Programming Manual

Program 92 : Copy Program

Input Data
• For Trunk Base : Trunk Port Number
001 ~ 084
• For Trunk Group Base : Trunk Group
Number 01 ~ 25
• For Extension Base : Extension Num-
ber Maximum eight digits
• For Department Group Base : De-
partment Group Number 01 ~ 32
• For DSS : DSS Console Number 01
~ 12
• For Door Phone: Door phone num-
ber : 1 ~ 6
Copy all data except Trunk Name (Item 01).

92-01 : Copy Program

XX ~ XX
Enter the extension, trunk, group
or other number from which the
data is to be copied.
Enter the first extension, trunk,
group or other number to which
the information is to be copied.
Enter the last extension, trunk,
group or other number to which
the information is to be copied. If
the information is being copied
only to one extension, trunk,
group or other number, enter the
information entered in the Desti-
nation Number (From) entry.
Program Name
SL1100
Program
Description
2-609
92