Chapter 1 Maintenance
7.
Resetting and Clearing the Server
Refer to this section if the server does not work or if you want to set BIOS settings back to the factory settings.
7.1
Software Reset
If the server halts before starting the OS, press <Ctrl> + <Delete> + <Alt> keys. Resetting the server clears the
memory.
7.2
BMC Reset
Press BMC RESET Switch only if a problem occurs in EXPRESSSCOPE Engine 3 (BMC).
Do not press BMC RESET Switch in usual operation.
To reset the BMC, press BMC RESET Switch at least five seconds.
Express5800/R120d-1E (2.5-inch Drive Model)
Express5800/R120d-1E (3.5-inch Drive Model)
42
Note
To reset the server when it is not frozen, make sure that no processing is in
progress
Tips
BMC RESET Switch only resets BMC and that does not reboot the server.
Express5800/R120d-1E, R120d-2E Maintenance Guide
7. Resetting and Clearing the Server
BMC RESET スイッチ
BMC RESET スイッチ