Table of Contents
Advertisement
Chapter 1 Maintenance
8.
System Diagnostics
System Diagnostics runs several tests on the server.
From the Tool menu of EXPRESSBUILDER, select Test and diagnostics to diagnose the system.
8.1
Test Items
The following items are tested in System Diagnostics
•
Memory
•
CPU cache memory
•
Hard disk drive
8.2
Startup and Exit of System Diagnostics
Start up System Diagnostics in the following procedure. (If the server is running, follow steps 1 to 4 after
shutting down and the server is ready to be rebooted.)
1. Start up EXPRESSBUILDER and select Tool menu.
For
information
EXPRESSBUILDER).
2. From the Tool menu, select Test and diagnostics.
From Test and diagnostics, select End-User Mode to start System Diagnostics. This process takes
about three minutes.
When the diagnostics is completed, the screen display changes as shown below.
Important
Be sure to disconnect the LAN cable before executing System Diagnostics.
Executing System Diagnostics with the LAN cable connected may affect the
network.
Tips
On checking hard disk drives, no data is written to the disk.
on
starting
up
EXPRESSBUILDER,
Note
In case Language selection menu appears, select English.
Express5800/R120d-1E, R120d-2E Maintenance Guide
8. System Diagnostics
refer
to
Chapter
2
(5. Details
of
51
Advertisement
Table of Contents
