Table of Contents
Advertisement
Chapter 2 Convenient Features
1.2.5
Boot
If you move the cursor to Boot, the Boot menu where you can configure the boot order appears.
For details about the options, see the table below.
Boot Configuration
Quiet Boot
Bootup NumLock State
Setup Prompt Timeout
Boot Option Priorities
Boot Option #1
Boot Option #2
Boot Option #3
Boot Option #4
CD/DVD ROM Drive BBS Priorities
Floppy Drive BBS Priorities
Hard Drive BBS Priorities
Network Drive BBS Priorities
Option
Parameter
Disabled
[Enabled]
On
[Off]
[0] - 65535
Express5800/R120d-1E, R120d-2E Maintenance Guide
−
Enable or disable the feature to display logo during
POST. When this option is set to Disabled, the results
of POST execution are displayed instead of the logo.
If BIOS Redirection Port is enabled, this option is
indicated as Unavailable and inaccessible (run with
Disabled state automatically).
Enable or disable Numlock feature of keyboard.
Specify the time between 0 and 65535 seconds until
the <F2> is pressed to launch SETUP.
−
−
These items display the priority of boot devices.
If all of the Boot Options are set to Disabled, the
−
SETUP starts running upon completion of POST.
−
−
−
Specify the boot priority for each BBS (BIOS Boot
Specification).
−
−
−
1. System BIOS
Descriptions
−
−
[
]: Factory setting
89
Advertisement
Table of Contents
