Table of Contents
Advertisement
Chapter 1 Maintenance
7.3
Forced Shutdown
Use this function when an OS command does not shut down the server, POWER Switch does not turn off the
server, or software reset does not work.
Continue to hold POWER Switch of the server for at least 4 seconds. The power is forcibly turned off. (To turn
on the power back again, wait approximately 40 seconds after turning off the power).
Express5800/R120d-1E (2.5-inch Drive Model)
Express5800/R120d-1E (3.5-inch Drive Model)
Note
If the remote power-on function is used, cycle the power once to load the OS after
the power has been forcibly turned off, and then turn off the power again by
shutting down the OS.
Express5800/R120d-1E, R120d-2E Maintenance Guide
7. Resetting and Clearing the Server
POWER switch
(Keep pressing for at least 4 seconds)
POWER switch
(Keep pressing for at least 4 seconds)
45
Advertisement
Table of Contents
