Table of Contents
Advertisement
Chapter 2 Convenient Features
1.2.4
Server
If you move the cursor to Server, the Server menu screen appears. For the menu that has
move the cursor to it and then press the <Enter> key to show its submenus.
The Server menu screen shows the options you can configure and their features. For the menu System
Management, move the cursor to it and then press the <Enter> key to show its submenus.
System Management
Power Control Configuration
Assert NMI on PERR
Assert NMI on SERR
FRB-2 Policy
Boot Monitoring
Boot Monitoring Policy
Option
Disabled
[Enabled]
Disabled
[Enabled]
[Retry 3 Times]
Disable FRB2 Timer
Always Reset
[Disabled]
5-60 minutes
[Retry 3 times]
Always Reset
Express5800/R120d-1E, R120d-2E Maintenance Guide
Parameter
−
−
Enable or disable feature to detect PCI
PERR.
Enable or disable feature to detect PCI
SERR.
Specify how the system should operate if
FRB level 2 errors occur.
Enable or disable the boot monitoring feature
and specify the timeout period.
To use this feature, NEC ESMPRO Agent
must be installed on OS. If starting up an OS
on which NEC ESMPRO Agent is not
installed, disable this feature
Specify how the OS is reset and booted when
a timeout error occurred during boot
monitoring.
Retry 3 times: Attempts to boot OS up to
three times.
Always Reset: Retries booting the OS
repeatedly.
This option can be selected while Boot
Monitoring is enabled.
1. System BIOS
on the left,
(1/2)
Descriptions
−
−
83
Advertisement
Table of Contents
