Toro Workman 1100 Service Manual page 83

6. Disassemble differential case assembly.
1. Bolt
2. Gear 62
A. Remove bolts securing gear 62 to the differential
case.
1. Spring pin
2. Differential case
Note: The spring pin can be punched out from the hole
on the opposite side of gear 62.
B. Remove spring pin from the differential case. Dis-
card pin and replace it with new spring pin.
Workman 1100/2100/2110
1
Figure 45
3
4
2
Figure 46
Page 5 – 29
2
3
3. Differential case
4
1
3. Pinion shaft
4. Pinion gear
C. Remove pinion shaft and gears from the case.
Separate gears from shaft.
Drive Train