Toro Workman 1100 Service Manual page 91

A. Apply molybdenum disulfide grease to the inside
of both pinion gears where they contact the pinion
shaft. Apply molybdenum disulfide grease to the out-
1. Side gear
2. Pinion gear
B. Install side gear, both pinion gears, and pinion
shaft into the differential case.
1. Spring pin
C. Align pinion shaft hole and install new spring pin
through the differential case and pinion shaft.
Workman 1100/2100/2110
side of both side gears where they contact the differ-
ential case and gear 62.
1
2
Figure 59
3. Pinion shaft
4. Differential case
2
Figure 60
2. Differential case
Page 5 – 37
4
3
1
Drive Train