Sharp AL-2020 Service Manual page 110

Main Sub
Contents
code code
46 15 FAX mode density
adjustment (Super fine)
(AL-2060 only)
18 Image contrast adjustment
(300dpi)
[Function]
When [START] key is pressed, scan is started with the entered exposure adjustment value and
the data of the selected mode on the FAX side is changed to the entered value.
For the density adjustment value table data, refer to SIM46-13 (FAX mode density adjustment
(Normal text).)
[Operation]
1) Initial display
ADJUST EXP.
("XX" is the corresponding exposure adjust-
ment value of the super fine mode stored on
the FAX side.)
2) Enter a 2-digit value as the exposure
adjustment value with [Numeric] key.
ADJUST EXP.
("YY" is the entered exposure adjustment
value.)
[Function]
Contrast is set for each mode.
When this simulation is executed, the current se value is displayed in 2 digits (Default: 50).
Change the set value and press [START] key to make a copy under the set value.
When the set value is increased, the contrast becomes higher. When the set value is
decreased, the contrast becomes lower.
In this case, only Exp.3 copy is made. When, however, the setting is made to make higher con-
trast, Exp.1 and Exp.5 copies also become in higher contrast. When made to a lower contrast,
Exp1. and Exp.5 copies become lower contrast, too.
Press [Exposure mode selector] key (or [
mode. The set value of the selected mode is displayed on the LCD/display.
(Adjustment value: 1 – 99)
Mode
AE mode (300dpi)
TEXT mode (300dpi)
PHOTO mode
TS mode (TEXT)
(300dpi)
TS mode (AE) (300dpi)
* No density display on LCD/display.
[Operation]
The operation is similar to simulation 46-01.
AL-2020/2035/2040/2050/2060 SIMULATION, TROUBLE CODES 10 - 20
Details of function/operation
3) Scan start (self print)
S-FINE ADJUST
XX
4) Print start (self print)
ADJUST
After completion of printing, returns to "2)"
display.
S-FINE
YY
] [
Display item LED
(AL-2050/2060) (AL-2050/2060)
AE COPY mode lamp AE mode lamp
TEXT PRINT mode lamp TEXT mode lamp
PHOTO SCAN mode lamp PHOTO mode lamp
TSTXT PRINT mode lamp
SCAN mode lamp
TSAE COPY mode lamp
SCAN mode lamp
EXP. S-FINE
SCAN YY
EXP. S-FINE
PRINT YY
] key for the AL-2050/2060) to switch the
Display lamp
(AL-2020/2035/2040)
TEXT mode lamp
PHOTO mode lamp
AE mode lamp
PHOTO mode lamp
Default
50
50
50
50
50