Sharp AL-2020 Service Manual page 66

21) Remove five screws and the grounding wire, and remove the
main drive unit.
1)
1)
1)
1)
CAUTION:Attach the gears securely
22) Remove the parts as shown below, and remove the pressure
release solenoid and the paper feed solenoid.
2)
1)
1)
2)
2)
3)
4)
4)
3)
AL-2030/2040CS/2050CS
23) Remove four screws, and remove the paper guide unit.
(AL-2020/2035/2040)
24) Remove four screws, and remove the lower paper guide unit.
(AL-2050/2060)
[Note for installation]
Fit the lower paper guide hole (a) with the shifter gear hole (b)
so that the black resin (c) of the shifter unit can be checked.
DISASSEMBLY AND ASSEMBLY 8 - 11
1)
1)
b
c
a
1)
1)
1)
2)
1)
1)
2)