Sharp AL-2020 Service Manual page 68

31) Remove the screw, slide the left cabinet to the left to detach it.
Remove each pawl, and remove the paper exit tray.
5)
4)
32) Remove two screws and remove the fusing connector.
33) Remove five screws and the connector, and lift the intermediate
frame unit to remove.
3)
1)
3)
1)
2)
4)
2)
2)
AL-2030/2040CS/2050CS
34) Remove the screw and the E-ring, and remove the PS semi-cir-
cular earth plate and the PS roller unit.
35) Remove the E-ring and remove the spring clutch from the PS
roller unit.
4) 4)
PS semi-circuler
PS semi-circular
earth plate
earth plate
2) 2)
3) 3)
36) Remove three screws and remove the TC front paper guide.
DISASSEMBLY AND ASSEMBLY 8 - 13
PS roller unit
Use grease of
Floil FG40H
only to apply to
this section.
1) 1)
1)
2)
5) 5)
4) 4)