Table of Contents
Advertisement
Functional Description
Table 4-6 Processor PMC Support (continued)
PrPMC Signal
MONARCH#
IDSELB
REQB#
GNTB#
M66EN
RESETOUT_L
EREADY
4.4
Miscellaneous
The following described functions and features are also part of the CPCI-6115.
4.4.1
Clock Generation
The CPCI-6115 synchronizes its CompactPCI bus interface to the received PCI clock from the
J1-D6 connector pin. Onboard logic determines the CompactPCI operating mode by looking at
the state of the CompactPCI M66EN and PCIXCAP signals at the end of reset. The onboard
clock generator is then configured to provide the necessary clocks for the CompactPCI
interface. All other clocks for onboard resources are generated locally.
4.4.2
Interrupt Handling
The following sections further describe CPCI-6115 interrupt-related topics.
84
Support
The CPCI-6115 leaves the MONARCH# pin floating, causing any installed
processor PMC to operate as a slave module. Processor PMC monarch mode is not
supported.
These IDSELB pins are resistively coupled to the appropriate PCI AD pins.
These REQB# pins are routed to the appropriate PCI bus arbiters.
These GNTB# pins are routed to the appropriate PCI bus arbiters.
The CPCI-6115 has a weak pull-up on this signal. If this signal is grounded, as it is
when a 33 MHz PMC module is installed, it will force the corresponding PCI bus to
33 MHz operation. If the signal remains high, this will allow 66 MHz operation.
The CPCI-6115 does not make any connection to RESETOUT_L.
The EREADY signals from each PMC are routed board Presence Detect Register
for software readability.
CPCI-6115 CompactPCI Single Board Computer Installation and Use (6806800A68D)
Miscellaneous
Advertisement
Table of Contents
