Compactpci User I/O Connector; Table 5-8 User I/O Connector Pinout, J5 - Motorola CPCI-6115 Installation And Use Manual

Transition Module Preparation and Installation
Table 5-7 User I/O Connector Pinout, J3 (continued)
Pin Row A
5 PMC1IO45
4 PMC1IO50
3 PMC1IO55
2 PMC1IO60
1 IPMI_PWR
*Not connected on MXP version
Signal Description
PMCIO:
PMC1IO(64:1)
Ethernet:
PORTn_TXP
PORTn_TXN
PORTn_RXP
PORTn_RXN
5.5.4

CompactPCI User I/O Connector

Connector J5 is a 110 pin AMP Z-pack 2mm hard metric type B connector. This connector
routes the I/O signals for the PMC2 I/O signals, the IDE port, four asynchronous serial ports
and I2C. The pin assignments for J5 on the processor board and the CPCI-6115-MCPTM are
as follows:
(Outer row F is assigned and used as ground pins but is not shown in the table).

Table 5-8 User I/O Connector Pinout, J5

Pin Row A
22 DRESET_L
21 INTRQA
20 CS1FXA_L
19 Not Connected
18 DIOWA_L
17 GND
16 DD9
15 DD5
14 DD0
13 PMC2IO5
98
Row B
PMC1IO44
PMC1IO49
PMC1IO54
PMC1IO59
PMC1IO64
PMC1 I/O signals 1 through 64
high side of differential transmit data
low side of differential transmit data
high side of differential receive data
low side of differential receive data
Row B
COM4_TXD
COM4_RXD
CS3FXA_L
DIORDYA
DA0
DD14
DD10
DD6
DD1
PMC2IO4
CPCI-6115 CompactPCI Single Board Computer Installation and Use (6806800A68D)
CompactPCI User I/O Connector
Row C Row D
PMC1IO43 PMC1IO42
PMC1IO48 PMC1IO47
PMC1IO53 PMC1IO52
PMC1IO58 PMC1IO57
PMC1IO63 PMC1IO62
Row C Row D
COM3_TXD COM2_TXD
COM3_RXD COM2_RXD
DA2 MXDI
DA1 MXCLK
TMCOM1_L I2C_CLK
DD15 DIORA_L
DD11 DD12
GND DD7
DD2 DD3
PMC2IO3 PMC2IO2
Row E Pin
PMC1IO41 5
PMC1IO46 4
PMC1IO51 3
PMC1IO56 2
PMC1IO61 1
Row E Pin
COM1_TXD 22
COM1_RXD 21
MXDO 20
MXSYNC# 19
I2C_DATA 18
Not Connected 17
DD13 16
DD8 15
DD4 14
PMC2IO1 13