NEC 140He User Manual page 147

No Error Message
The required XML tag is not
5
found.
6 Failed to write the file.
7 Invalid user name
8 The user name is too long
9 The password is too long.
10 Passwords are not matched.
11 Invalid HTTP port number
12 Invalid SSL port number
13 HTTP/SSL should not be the
same.
14 Invalid login attempt period
15 Invalid failed login attempts
16 Invalid account lock period
17 Invalid IP address
18 Invalid subnet mask
19 Invalid default gateway
20 Invalid DNS server IP address
21 Invalid host name
22 Invalid domain name
The SMTP server address is too
23
long.
24 Invalid SMTP port number.
25 Invalid retry count
26 Invalid retry interval
27 "To" is too long.
28 "From" is too long.
29 "Subject" is too long.
30 The message is too long.
31 Failed to open the file:
32 Failed to close the file:
33 Can't open the file:
34 Timeout has occurred.
Firmware update errors
No Error Message
1 There are uncompleted update
images on BMC as follows:
2 Failed to acquire status of the
update area.
3 Update data is too large:
4 Failed to prepare update
5 Invalid file size:
6 Could not find the revision
information:
7 Failed to create rollback image.
8 Failed to erase.
9 Unsupported format version:
What to do
The BMC configuration file may be corrupted. Check the file.
The BMC configuration file is not saved successfully. Change the
location to save the file and try again.
You can use only alphanumeric characters, minus sign (–), and
underscore (_) for a user name. A user name should be 32 characters or
less.
A user name should be 32 characters or less.
Use 16 or less characters.
Again, input passwords.
You can use only numeric values.
You can use only numeric values.
The same port number cannot do them. Specify different value.
You can use only numeric values.
You can use only numeric values.
You can use only numeric values.
Use numerals and periods to specify an IP address.
Use numerals and periods to specify a subnet mask.
Use numerals and periods to specify a default gateway.
Use numerals and periods to specify the IP address of DNS server.
You can use only alphanumeric characters, minus sign (–), and
underscore (_) for a host name. A host name should be 64 characters or
less.
You can use only alphanumeric characters, minus sign (–), and
underscore (_) for a domain name. A domain name should be up to 256
characters.
Specify within 256 characters.
You can use only numeric values.
You can use only numeric values.
You can use only numeric values.
Specify within 256 characters.
Specify within 256 characters.
Specify within 512 characters.
The message should be up to 4064 characters.
The specified file may not exist. Check the file name.
The specified file may be corrupted.
The specified file may not exist. Check the file name.
Try again. If the error persists, contact your service representative
because a failure may have occurred in BMC.
What to do
Reboot the server and complete the update.
The network may be busy. Try again. If the error persists, contact your
service representative because a failure may have occurred in BMC.
Some update files may be corrupted. Acquire update files again.
The network may be busy. Try again. If the error persists, contact your
service representative because a failure may have occurred in BMC.
The update file may be corrupted. Acquire the update file again.
Some update files may be corrupted. Acquire update files again.
Try again. If the error persists, contact your service representative
because a failure may have occurred in BMC.
Try again. If the error persists, contact your service representative
because a failure may have occurred in BMC.
Some update files may be corrupted. Acquire update files again.
4-75