Table of Contents
Advertisement
4-10
Advanced
The Advanced menu appears if you move the cursor to the position of "Advanced."
To display a submenu, position the cursor on a selection that has a submenu (preceded by symbol
See the table below for the items.
Option
Parameter
Boot-time
[Disabled]
Diagnostic
Enabled
Screen
Reset
[No]
Configuration
Yes
Data
NumLock
On
[Off]
Memory/
[Boot]
Processor Error
Halt
Description
Specify whether the self-diagnosis (POST) running screen is
displayed or not on booting.
If this item is set to "Disabled," our logo appears during POST.
(Pressing Esc in the status causes the screen display to be
switched to the POST execution screen.
The Boot-time Diagnostic Screen is automatically enabled if the
Console Redirection is enabled.
Select "Yes" to clear the extended system configuration data
area (system information stored by POST). The parameter is
changed to "No" after the system is booted.
Specify whether the NumLock is enabled or disabled on
booting.
Indicates whether POST is paused at the occurrence of a
processor or memory error during the execution of POST.
When processor error or Memory error is encountered, the
utility is not paused at the end of POST if this item is set to
"Halt" and even though "POST Error Pause" of "Server" menu is
"Enabled".
and press Enter.
)
Your Setting
[ ]: Factory-set
Advertisement
Table of Contents
