Husqvarna TE 250 Workshop Manual page 318

ELECTRIC SYSTEM, DIGITAL INSTRUMENT
2- SPEED / H / RPM (figure 2)
- SPEED: motorcycle speedmaximum value: 299 kmh or 299 mph;
- H: shows the running hours of the engine (data are saved in permanent memory
every 10 minutes)- Maximum value: 9999:59;
- RPM: engine r.p.m. shown on the vertical LED indicator.
3- SPEED / CLOCK / RPM (figure 3)
- SPEED: motorcycle speedmaximum value: 299 kmh or 299 mph;
- CLOCK: clock- Reading from 0:00 to 23:59:59 (the data will be lost after battery
detachment).
To reset the clock, push the knob SCROLL (A) for more than 3 seconds in order
to increase the hours; release the knob and then, after 3 seconds, it is possible
to increase the minutes;
- RPM: engine r.p.m. shown on the vertical LED indicator.
4- SPEED / TRIP 1 / RPM (figure 4)
- SPEED: motorcycle speedmaximum value: 299 kmh or 299 mph;
- TRIP 1: distance- maximum value: 999.9 km (the data will be lost after battery
detachment).
If the STP 1 will be set to zero, the functions TRIP 1 and AVS 1 will be set to zero
too.
The function TRIP 1 is ON unitedly with the function STP
1 (*).
- RPM: engine r.p.m. shown on the vertical LED indicator.
(*): see figure 5
5- SPEED / STP 1 / RPM (figure 5)
- SPEED: motorcycle speedmaximum value: 299 kmh or 299 mph;
- STP 1: miles/kilometers covered time- Reading from 0:00 to 23:59:59 (the data
will be lost after battery detachment).
To activate the function STP 1, push the knob SCROLL (A) for more than 3
seconds.
- 1st step: function ON;
- 2nd step: stop to the counters;
- 3rd step: STP 1 zero-setting; TRIP 1 and AVS 1 data zerosetting;
- 4th step: function ON;
- 5th step: stop to the counters;
.............................
and so following
STP 1 data+TRIP 1 data=AVS 1 (*).
- RPM: engine r.p.m. shown on the vertical LED indicator.
(*): see figure 6
M.38 Part. N. 8000 B0148 (02-2008)