Adjustment Of Starter Decompression Device - Husqvarna TE 250 Workshop Manual

Hide thumbs Also See for TE 250:

Table of Contents

SETTINGS AND ADJUSTMENTS

Adjustment of starter decompression device

In order to adjust the lever decompressor free play (approximately 3 mm - 0.12

in.): should the clearance be incorrect, unblock the counter ring-nut and turn the

adjusting screw (by unscrewing it, the clearance is reduced, while by screwing

screw it is increased); the lever holder (5) is provided with the adjuster (6); the

adjustment can be also effected with the tightener (7) on the R.H. side of the

engine (use this tightener if it is not possible to obtain the correct free play with

the adjuster on the handlebar).

Part. N. 8000 B0148 (02-2008)

Show Quick Links

Table of Contents